During transport from the factory to the customer the wood moisture in the panels can change within a short period of time. Therefore, we recommend climatisation before further processing (min. 1 day). During this conditioning phase the panels adjust to the new room climate.
Remove the film covering and store the panels in a horizontal position, to enable air to get to both sides of the panel.
Ensure that there is a balanced room climate (approx. 20°C, 35-50% relative humidity). Especially during the heating period, to avoid cracks and distortion.
When milling large surfaces, it is necessary to mill on both sides to keep the tension evenly balanced.
The same surface treatment should be used on both sides (varnish/varnish, wood oil/wood oil). Otherwise distortion can occur.
Check the quality of the solid wood panels before further processing. Do not process faulty panels.
Further processing information is included in all packaging!
we promise our carpenter
FINAL MOISTURE a residal moisture of 7-9%
HAND-PICKED Each plate will be sorted for colour and structure
HIGH-TECH-PROCESSING The top layer will be planed (jointed) and glued on the length edge. It is the same thickness of the top layer on both sides, i.e. less distortion
QUALITY TESTED All particels will be tested for wood quality, strength of shape, also process- and glue quality.